Tiffen Community

Tiffen Community (http://www.tiffen.com/forum/index.php)
-   Davis & Sanford Tripods (http://www.tiffen.com/forum/forumdisplay.php?f=4)
-   -   Why is my D&S 7518 not 64 inches? (http://www.tiffen.com/forum/showthread.php?t=2306)

Phoney Baloney 08-14-2012 12:09 AM

Why is my D&S 7518 not 64 inches?
I have the D&S Provista 7518B tripod. From what I can tell, it is supposed to reach a height of 64 inches. It only reaches 54 inches. What am I missing? Where are my extra 10 inches?

lboden 08-14-2012 08:43 AM


Can you please e mail me a picture of your tripod set up so we can figure out what is wrong?

Please e mail lboden@tiffen.com and we will get this straight for you.


Phoney Baloney 08-14-2012 12:51 PM

For the rest of you, this is my tripod
1 Attachment(s)
For the rest of you, this is my tripod:

lboden 08-15-2012 07:28 AM

Thanks for posting your picture of Provista 7518. Your picture is an older version of our Provista tripod. However, the tripod should not be 54 inces tall . The tripod is measured from the floor to the top of the head. If you have a sales receipt from a valid Tiffen retailer, we will replace the tripod at no charge.


Phoney Baloney 08-16-2012 11:10 AM

I bought it from J&R
But Leigh, *why* is the tripod only 54 inches? Are the leg extenders supposed to be longer?

I bought this from J&R several weeks ago. Is that valid? Shall I post the receipt, or email it to you?

All times are GMT -5. The time now is 05:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.